thank you for your help & participation in improving PrintFab.
I have compiled a new beta version of PrintFab/Windows that has an option
to print a linearization chart page:

dialog "profiles" -> button "Print color chart" -> option "Linearization
chart".

After adding a new profile entry, print the chart and measure the 32 fields
(you can also measure every second field or every n-th field to reduce the
number of measurements).

Then convert Lab values to C/M/Y/K density values.

Then open the file

c:\programdata\zedonet\printfab 1.x\*.tpr

in a text editor. The file with the highest number and the newest date
should be the right one - you can check the "Name=..." entry in the file.

Then edit the lines "Density..." in the section "Linearization"
and the lines "DRange..." in the section "Color_Profile".

In the Density... lines, enter the density values for each color channel
(any number of equidistant measurement points will do). E.g.

Density_c2=<lowest light cyan density>, .... , <highest light cyan density>

In the DRange... lines, enter the lowest and highest value (needed for
re-linearization):

DRange_c=<lowest cyan density>,<highest cyan density>

You can't save the file directly to the "PrintFab 1.x" directory unless you
start the text editor as an administrator. However, you can save to a
different directoy and then drag&drop to the "PrintFab 1.x" directory.

Then you can continue as usual by printing, measuring and importing your
ICC profile.

If you want to re-linearize later, only update the Density... lines and
don't touch the DRange... lines.

We measure densities with an EyeOne device, the
output values are multiplied by 100.

без линеаризации кривых ничего не получится

Если PrintFAB не падасть больше чернил на определенный цвет ничего и не будет с вашим printcal

Может хватит троллить?